Programming The On-Delay Timer - Siemens SIMATIC S7-200 Manual

Programming the On-Delay Timer

Using Toolbar
Hardware Software
Save the program and transfer
it to the PLC. Test its function.
Basic 1st Exercise
Settings Program
1.
To be able to evaluate the timer to
be inserted in our OR logic opera-
tion, you must program the timer
yourself in a previous network.
2.
First of all insert a normally-open
contact for input E0.3 in the first
column of the new network 1.
Then input a timer in the second
column as the on-delay timer.
Select the Box-F9 tool bar
button.
3.
Scroll down until the function TON
(on-delay timer) appears and select
it by clicking the mouse.
4.
Select the fields for PT and TON
and input your values, in this case
100 and T34.
5.
In the last step, the timer bit
T34 must now appear in
network 2 in the position of E0.3.
Make the correction.
More
Exercises
Appendix 37