Husqvarna PG 510 Operator's Manual page 10

Metal bond diamond tools
Note: We recommend 3 tools with 1 segment on each
®
Redi Lock holder disc when you remove surface or
usual concrete.
®
• Use Redi Lock holder disc to attach metal bonded
diamond tools.
®
• A Redi Lock holder disc with half set.
• Grinding head with half set on the 3 grinding discs.
Resin bond diamond tools
• Use resin holder disc to attach plastic bonded
diamond tools.
10
• Plastic bonded tool attached to resin holder disc.
• Grinding head with 3 resin holder discs and tools
To do before you operate the product
1. Read the operator's manual carefully and make sure
that you understand the instructions.
2. Do daily maintenance. Refer to
page 13 .
3. Make sure that the product is assembled correctly
and is not damaged.
4. Put the product on the work area.
5. Make sure that there are diamond tools on the tool
plate and that they are tightly attached.
6. Connect the dust extractor to the product. Refer to
To connect a dust extractor on page 13
7. Adjust the handlebar to set the necessary work
height.
8. Make sure that the motor cable is connected to the
electrical enclosure before the product is connected
to an electric socket.
9. Connect the power plug of the product into the mains
outlet.
Maintenance on
1146 - 001 - 29.04.2019