Operation Procedure With External Control - Panasonic LP-400 Series External Control Manual

1-2-2 Operation procedure with external control

⿎ Operation example when controlling the laser marker from external control devices such as
PLC
Turn ON key switch of laser marker controller
Remote mode ON
Refer to "1-3-3 Shift to remote mode" (P.23).
I/O control
Select file
Laser pumping ON
Open shutter
READY output ON
The device is ready for receiving the marking starting signal (trigger).
Marking trigger input ON
Reference
• It is available to the external control combining I/O, and serial communication commands.
• Configure the environment setting on the I/O communication in advance before using external control. Refer to "1-3
Before External Control" (P.18).
Control by serial communication commands
about 15 to 20 seconds
Marking (Laser radiation)
ME-LP400V-EX-6
Control by using I/O
or communication
commands
17