SHENZHEN ENCOM ELECTRIC TECHNOLOGIES CO. EN500 Series Service Manual page 2

Print version: V2.0-A2
Foreword
Thank you for purchasing EN500/EN600 series inverter developed and produced
by Shenzhen Encom Electric Technologies CO., LTD.
EN500/EN600 series hi-performance flux vector inverter adopt advanced control
mode to achieve high torque, high precision and wide-range speed regulation
drive, and it also support speed sensorless torque control and PG control torque.
It can meet customer all kinds of requirement to universal inverter. EN500/EN600
inverter is a organic combination for customer's universal and industrial control
purpose and provide practical main-auxiliary frequency provision, run channel
frequency binding, PID regulator, simple PLC, spinning traverse, programmable
input&output terminal control, pulse frequency provision and inbuilt Modbus,
Can bus, Profibus, 485 freedom protocol and other function and platform. It
provide high integration solution for most manufacturing and automation
customer and EN500/EN600 inbuilt input phase loss function, output phase loss
function, short circuit to earth grounding function and many other protective
function to improve effectively the system reliability and safety.
This brochure provide the installation and wiring, settings, fault check and
methods, maintenance and other relative issues to customer. To make inverter
assemble and operate rightly, and use its high performance to best, please read this
brochure carefully before installation usage and keep them well to the final users
of inverter.
Please contact our office or dealer anywhere at any moment when you have any
doubts or special demands in using these inverters, and you can also contact our
after service center in our Headquarters directly. We will serve you with all our
heart.
We reserve our right to notice you if we change contents of this manual.