Table of Contents
Advertisement
READOUT FUNCTION (Only available in OD-545B)
[38]
CURSOR measurement
CURSOR ON/OFF. Press the button to turn on/off the cursor measurement.
CURSOR FUNCTION. Press the button to select the measurement functions.
TRACK -∇ -
selected cursor is indicated by either a ∇ or
displayed, the two cursors can be shifted simultaneously.
[35]
POSITION. Rotate the cursor POSITION control to position the selected
cursor(s). When HORZ. DISPLAY mode is set A INT or B state and CURSOR
ON/OFF is set OFF, the POSITION control is used in common as the DELAY
TIME.
READOUT ON/OFF
PROBE x1 / x10
Page 16
∆V
Voltage difference measurement.
∆V%
Voltage difference measurement in percentage
(5 div =100% ref.)
∆VdB
Voltage gain measurement
(5 div = 0dB ref. , ∆VdB = 20 log∆div/5div)
∆T
Time difference measurement.
1/∆T
Frequency measurement.
DUTY
Duty cycle or time difference percent (∆T%)
measurement (5 div =100% ref.)
PHASE Phase measurement (5 div = 360° ref.)
(REF): Press the button to select the cursor(s) to be moved. The
To turn on/off the readout status on the CRT, press the
CURSOR ON/OFF and CURSOR FUNCTION buttons at
the same time.
To indicate the voltage readout is scaled for x1 or x10
probe, press the TRACK -∇ -
the cursor POSITION at the same time.
OD-514B, OD-515B & OD-545B INSTRUCTION MANUAL
symbol. When both symbols are
(REF) button and rotate
November 2000
Advertisement
Table of Contents
