GE SIGNA Voyager Pre-Installation page 152

b. Test location
c. Test conditions:
i. Steady state
ii. Transient
iii. Heel drop
iv. Normal environment
v. Typical traffic
vi. Any other conditions necessary to demonstrate understanding of potential sources of
vibration
3. The customer's vibration testing service is responsible for interpreting the results and
determine if that site meets GE Healthcare specifications
4. If the vibration levels are too high, additional data acquisition may be necessary to:
a. Determine the source of the vibration
b. Propose a solution to the problem
c. Find an alternate site location
5. Any questions regarding test equipment requirements, test parameters, or general questions
should be discussed with the GE Healthcare Project Manager of Installation (PMI)
152
SIGNA Voyager Pre-Installation
Direction 5680008–1EN, Revision 2
2 MR Site Vibration Test Guidelines