GE SIGNA Voyager Pre-Installation page 118

PEN Wall Closet Outline (Case 2: Cabinets are installed separately)
Illustration 4-20
Specification, refer to Finished Room Requirements.
Consider the door of closet so that each cabinet's Pen Wall cover can be accessible and
removable.
NOTE: Dimensions are in inches. Bracketed dimensions are in millimeters.
1 Minimum closet inner dimensions outline
2 RF Shield
3 Pen Wall Covers are fixed to mesh shield by GE supplied screws
4 11.8inch (300mm) side space is for excess cable storage. Left side space 5.9(150) and right side space 11.8 (300) can
be swapped.
118
and Illustration 4-21 show the minimum PEN Wall Closet Outline. For Pen Wall
Illustration 4-20: Minimum ISC PEN Wall Closet Outline
SIGNA Voyager Pre-Installation
Direction 5680008–1EN, Revision 2
4 ISC and ICC Wall Opening Requirements