The Rear Ports - Billion BiPAC 7300GX User Manual

2.4 The Rear Ports

8
7
Port
Power
1
Switch
2 Power
3G card
3
slot
4 Reset
5 WPS
Ethernet
6
7 DSL
8
Antenna
The 3G card slot does not support hot swap (swapping whilst the
device is still turned on). If you need to change the 3G card, please
turn the power off before replacing the 3G card.
Attention
Attention
6
Description
Power ON/OFF switch.
Connect the supplied power adapter to this jack.
Connect the 3G card bus data card to this slot
After the router is powered on, press this reset button using the
end of paper clip or other small pointed object to reset the router
and to restore it to factory default settings.
1. Recovery procedures for non-working routers (e.g. after a
failed firmware upgrade flash).
2. Recovery procedures for a lost web interface password:
Push WPS button to trigger Wi-Fi Protected Setup function.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
Connect the supplied RJ-11 ("telephone") cable to this port when
connecting to the ADSL/telephone network.
Connect the detachable antenna to this port.
4 3
5
2
1
12