Receiving The System - Agilent Technologies 7700 Series Site Preparation Manual

Receiving the System

When your 7700 ICP- MS system is delivered, it is your responsibility to provide
for the removal of the shipping containers from the truck and their storage until
installation. Contact your Agilent Technologies engineer as soon as your
shipment arrives to arrange an installation date.
Unloading
The shipping containers are heavy. They require a loading dock and a fork lift
or similar lifting device.
The shipping containers must be kept upright at all times to prevent damage to the
C A U T I O N
instrument.
Storage
It is your responsibility to store the containers until installation. Do not open
any shipping containers until an Agilent Technologies representative is present.
Warranty claims for missing items will not be honored unless an Agilent
Technologies representative is present to verify the contents of each container
as it is unpacked.
The 7700 ICP- MS shipping container has the following dimensions.
Table 1
Agilent 7700 Mainframe
The environment in the storage area should be between 5°C and 50°C with 20%
to 80% relative humidity, and a non- condensing and non- corrosive atmosphere.
2
Shipping Container Approximate Dimensions
Height
85cm (34in)
G3280-90010 (Rev.B) Agilent 7700 Series ICP-MS Site Preparation Guide
Width Depth
98cm (39in) 98cm (39in)
Weight
150kg (330 lb)