Installation And Verification - Agilent Technologies 7700 Series Site Preparation Manual

Installation and Verification

Once the installation has begun, it should progress in a timely manner to
completion. Delays due to inadequate site preparation could cause loss of
instrument use during the warranty period. In extreme cases, Agilent
Technologies may ask to be reimbursed for the additional time required to
complete the installation.
The final step in the installation process is system verification. Your Agilent
Technologies engineer tests the system against standards as documented for the
product(s) you have purchased.
The Agilent Technologies engineer will not test your system against your standards or
N O T E
samples. Further, the Agilent Technologies engineer will not set up your laboratory
procedures. Assistance with laboratory procedures can be obtained from your local Agilent
Technologies Applications Engineer on a consulting basis at additional cost.
G3280-90010 (Rev.B) Agilent 7700 Series ICP-MS Site Preparation Guide 3