Interface - Siemens FC2005 Programming Manual

1. INTERFACE

LCD:
a 160 by 64 dot LCD display is used to display event data, including alarms and troubles conditions, zone or
device custom identification of messages, and a log of the system event history. A back light is included in the
display to assure visibility in low light; To conserve power, the back light is only activated during a reported
event or on operation of a display control button.
LCD is divided into two parts:
is used to display events type, events amount, user level, system time. Pressing "MENU",
operation menu according to user level.
is used to display event name, event occurrence time, event in/out, event type. The LCD can display two
events at a time. User can cycle through a circular list once the first event or last event message is reached.
Events are displayed according to the following rules:
1: Events priority:
Unacknowledged Alarm > Unacknowledged Supervisory > Unacknowledged Trouble > Acknowledged
Alarm > Acknowledged Supervisory > Acknowledged Trouble > Status > Test
2: Within events of the same priority, all events are displayed in the happened sequence, and the latest in the
first;
3: Status events are displayed according to the event setting. If it is configured as "No display", it will not be
listed in Event List.
Programming Manual of FC2005/FC901
Fig. 1-1 Interface of FC2005/FC901
Fig. 1-2 LCD Display
will display
Page: 4/48