2.1 Login
1.
Press "Menu" to display the main menu (Fig. 2-1).
2.
Press " " to select "Login" and press "OK", the password entry
screen is displayed (Fig. 2-2).
3.
Enter the password of maintenance level or technician level and
press "OK", login successfully if the password is correct. The top
right corner displays the new level "L2" or "L3".
Note:
Default password for L 2 is 1234, for L 3 is 4321. Password can be
-
changed.
System log out automatically after 3 times of wrong entries.
-
2.2 Logout
There are two ways to logout:
Logout automatically: System automatically logs out to L 1 if no operations take place during a preset
login time. (System login time can be set by system timer.)
Log out manually:
1.
Press "Menu" to display the main menu (Fig. 2-3).
2.
Press " " to select "Logout" and press "OK", the logout screen is
displayed (Fig. 2-4).
3.
Press "OK" to confirm to logout to Level 1; Press "C" to cancel the
logout operation.
Note:
Users can directly login L 2/3 from L 1; but if the current user level
is L2, you have to logout to L1 and then login to L3. It is same for
L3.
Programming Manual of FC2005/FC901
Fig. 2-1
Fig. 2-2
Fig. 2-3
Fig. 2-4
Page: 8/48