Io Modules - Siemens SIPROTEC PROFINET IO Manual

2.4

IO Modules

The IO modules described in the following are available for the PROFINET IO configuration of the SIPROTEC
devices in the IO controller. For this purpose, the GSDML file, which contains the description of the IO modules,
is loaded into the parameterization software of the IO controller.
Figure 2-13 shows an example for selecting the IO modules of the SIPROTEC IO device with electrical
Ethernet interface in the Siemens parameterization software Step7 and a configuration example of a
SIPROTEC device for PROFINET IO. For more information on the parameterization, refer to Chapter 3.
Figure 2-13
SIPROTEC 4, Communication Module PROFINET IO, Communication Profile
C53000-L1840-C360-1, Edition 08.2012
Parameterization Example
2 PROFINET IO in SIPROTEC
2.4 IO Modules
29