Headlight Washers - If Equipped - Jeep Grand Cherokee SRT 2018 Owner's Manual

Hide thumbs Also See for Grand Cherokee SRT 2018:
Table of Contents

Advertisement

Rotating the center portion upward
once more will activate the washer
pump which will continue to operate as
long as the switch is held. Upon re-
lease of the switch, the wipers will resume the
continuous rear wiper operation. When this ro-
tary control is in the OFF position, rotating it
downward will activate the rear washer pump
which will continue to operate as long as the
switch is held. Once the switch is released it will
return to the OFF position and the wipers will
cycle several times before returning to the
parked position.
NOTE:
As a protective measure, the pump will stop if
the switch is held for more than 20 seconds.
Once the switch is released the pump will re-
sume normal operation.
If the rear wiper is operating when the ignition is
turned OFF, the wiper will automatically return to
the "park" position.
HEADLIGHT WASHERS —
IF EQUIPPED
The multifunction lever operates the headlight
washers when the ignition switch is in the ON
position and the headlights are turned on. The
multifunction lever is located on the left side of
the steering column.
To use the headlight washers, push the multi-
function lever inward (toward the steering col-
umn) and release it. The headlight washers will
spray a timed high-pressure spray of washer
fluid onto each headlight lens. In addition, the
windshield washers will spray the windshield
and the windshield wipers will cycle.
NOTE:
After turning the ignition switch and headlights
ON, the headlight washers will operate on the
first spray of the windshield washer and then
every eleventh spray after that.
49

Advertisement

Table of Contents
loading

Table of Contents