Table of Contents
Advertisement
To reset the power folding mirrors: Fold and
unfold them by pushing the button (this may
require multiple button pushes). This resets
them to their normal position.
Heated Mirrors — If Equipped
These mirrors are heated to melt frost
or ice. This feature will be activated
whenever you turn on the rear window
defroster (if equipped). Refer to "Cli-
mate Controls" in "Getting To Know Your Ve-
hicle" for further information.
Tilt Side Mirrors In Reverse
(Available With Memory Seat Only)
— If Equipped
Tilt Side Mirrors In Reverse provides automatic
outside mirror positioning which will aid the
driver's view of the ground rearward of the front
doors. Outside mirrors will move slightly down-
ward from the present position when the vehicle
is shifted into REVERSE. Outside mirrors will
then return to the original position when the
vehicle is shifted out of REVERSE position.
Each stored memory seat setting will have an
associated Tilt Side Mirrors In Reverse position.
NOTE:
The Tilt Side Mirrors In Reverse feature is not turned
on when delivered from the factory. The Tilt Side
Mirrors In Reverse feature can be turned on and off
using the Uconnect System. Refer to "Uconnect
Settings" in "Multimedia" for further information.
42
Illuminated Vanity Mirrors
To access an illuminated vanity mirror, flip down
one of the visors.
Lift the cover to reveal the mirror. The light will
turn on automatically.
Illuminated Vanity Mirror
EXTERIOR LIGHTS
Headlight Switch
The headlight switch is located on the left side of
the instrument panel, next to the steering wheel.
The headlight switch controls the operation of
the headlights, parking lights, instrument panel
lights, cargo lights, and fog lights (if equipped).
Headlight Switch
To turn on the headlights, rotate the
headlight switch clockwise. When
the headlight switch is on, the park-
ing lights, taillights, license plate
light and instrument panel lights are
also turned on. To turn off the headlights, rotate
the headlight switch back to the O (off) position.
NOTE:
• Your vehicle is equipped with plastic head-
light and fog light (if equipped) lenses that are
lighter and less susceptible to stone break-
age than glass lights. Plastic is not as scratch
resistant as glass and therefore different lens
cleaning procedures must be followed.
• To minimize the possibility of scratching the
lenses and reducing light output, avoid wiping
with a dry cloth. To remove road dirt, wash
with a mild soap solution followed by rinsing.
Advertisement
Chapters
Table of Contents
