Identification Data; Vehicle Identification Number; Wheel And Tire Torque Specifications; Torque Specifications - Jeep Grand Cherokee SRT 2018 Owner's Manual

IDENTIFICATION DATA

Vehicle Identification Number

The Vehicle Identification Number (VIN) is found
on a label located on the left front corner of the
instrument panel pad, visible from outside of the
vehicle through the windshield. This number
also is stamped on the right front floor, behind
the right front seat. Move the right front seat
forward to allow better viewing of the stamped
VIN. This number also appears on the Automo-
bile Information Disclosure Label affixed to a
window on your vehicle. Save this label for a
convenient record of your vehicle identification
number and optional equipment.
VIN Location
252
Right Front Body VIN Location
NOTE:
It is illegal to remove or alter the VIN.
WHEEL AND TIRE TORQUE
SPECIFICATIONS
Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to the
vehicle. Any time a wheel has been removed
and reinstalled on the vehicle, the lug nuts/bolts
should be torqued using a properly calibrated
torque wrench using a high quality six sided
(hex) deep wall socket.

Torque Specifications

Lug Nut/ **Lug Nut/
Bolt Torque Bolt Size
110 Ft-Lbs
M14 x 1.50
(149 N·m)
**Use only your authorized dealer recom-
mended lug nuts/bolts and clean or remove any
dirt or oil before tightening.
Inspect the wheel mounting surface prior to
mounting the tire and remove any corrosion or
loose particles.
Wheel Mounting Surface
Tighten the lug nuts/bolts in a star pattern until
each nut/bolt has been tightened twice. Ensure
that the socket is fully engaged on the lug
nut/bolt (do not insert it half way).
Lug Nut/
Bolt Socket
Size
22 mm