Jeep Grand Cherokee SRT 2018 Owner's Manual page 206

4. Turn the low or high beam bulb one–quarter
turn counterclockwise to remove from hous-
ing.
5. Disconnect the electrical connector and re-
place the bulb.
Front Turn Signal Lamp
The front turn signal lamps are LEDs. See your
authorized dealer for service.
Front Fog Lamps
Please see your authorized dealer for service.
Rear Tail, Stop, and Turn Signal Lamps
1. Raise the liftgate.
2. Remove the two push-pins from the tail lamp
housing.
Tail Lamp Push Pins
3. Grasp the tail lamp and pull firmly rearward
to disengage the lamp from the aperture
panel.
4. Twist socket counter clockwise and remove
from lamp.
Rear Of Tail Lamp
1 — Rear Stop Lamp Bulb Socket
2 — LED Tail Connector – Do Not Remove
3 — Rear Turn Signal Bulb Socket
5. Pull the bulb to remove it from the socket.
6. Replace the bulb, reinstall the socket, and
reattach the lamp assembly.
Rear Liftgate Mounted Tail Lamp
Rear Liftgate Tail Lamps
1. Raise the liftgate.
2. Use a suitable tool to pry the lower trim from
the liftgate.
Liftgate Lower Trim
203