Siemens SIMATIC ET 200AL Manual page 26

Configuration mode DIQ with value status
The figure below shows the assignment of the address space for the digital input/digital
output module DIQ 16x24VDC/0.5A 8xM12 with value status (Quality Information, QI) in the
configuration method DIQ.
The address space for the value status is allocated by the module, if the value status is
configured using the PROFINET interface module.
Figure 3-3
Configuration mode DQ16
In DQ16 configuration mode, the address space is reduced by the fixed parameter
assignment.
Figure 3-4
Digital input/Digital output module DIQ 16x24VDC/0.5A 8xM12 (6ES7143-5AH00-0BA0)
Manual, 03/2019, A5E38688112-AC
Address space in DIQ with value status configuration mode
Address space in DQ16 configuration mode
Configuration modes for digital inputs/outputs
3.3 Parameters/address space
25