Sony 480p Operating Instructions Manual page 24

Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
to DIGITAL OUT
(COAXIAL or OPTICAL)
Coaxial digital cord
(not supplied)
to coaxial or optical
digital input
[Speakers]
Front (L)
Front (R)
l: Signal flow
z Hint
To realize better surround sound effects, make sure
that your listening position is in between your
speakers.
24
CD/DVD player
Optical digital cord
(not supplied)
Remove jack cap
before connecting
or
Stereo amplifier (receiver)
Stereo audio cord
(not supplied)
(white)
or
(red)
(white)
(red)
to audio input
MD deck/DAT deck
Note
Super Audio CD audio signals are not output from
the digital jack.
. If the amplifier
B-1
to LINE OUT AUDIO L/R
1 or 2
.
B-2