Settings For The Speakers (Speaker Setup) - Sony 480p Operating Instructions Manual

• 48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
48kHz/16bit The audio signals of DVD
VIDEOs are always converted
to 48kHz/16bit.
96kHz/24bit All types of signals including
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for
copyright protection purposes,
the signal is only output as
48kHz/16bit.
Notes
• Even if you set "48kHz/96kHz PCM" to "96kHz/
24bit," the sampling frequency is converted to
48kHz/16bit when a "SURROUND" mode (page
69) is selected.
• The analog audio signals from the LINE OUT
AUDIO L/R jacks and 5.1CH OUTPUT jacks are
not affected by this setting and keep their original
sampling frequency level.
92
Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
input the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume and balance of the speakers
to the same level.
This setting is effective when connecting a
speaker with 5.1 CH OUTPUT jacks (page
26).
Select "SPEAKER SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 85).
The default settings are underlined.
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
To return to the default setting
Select the item, then press CLEAR. Note that
only the "SIZE" setting does not return to the
default setting.
SIZE
Selects the size of the speakers.
• FRONT
LARGE Normally select this position.
SMALL
Select this when the speaker
cannot reproduce adequate bass
frequencies.
• CENTER
LARGE
Normally select this position.
SMALL
Select this when the speaker
cannot reproduce adequate bass
frequencies.
NONE
Select this if you do not connect
a center speaker.
OFF
LARGE
LARGE
LARGE ( REAR )
YES