Step 4: Connecting The Audio Cords - Sony 480p Operating Instructions Manual

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
• Surround effects: TVS DYNAMIC (page 70),
TVS WIDE (page 70)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 70)
or
MD deck/DAT deck
• Surround effects: None
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 91)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 98)
– DTS (5.1 ch) (page 98)
– Super Audio CD Multi channel (page 98)
or
AV amplifier (receiver) with digital input jacks
having a Dolby or DTS** decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 98)
– DTS (5.1 ch) (page 98)
through .
A D
Connection
(page 23)
A
(page 24)
B
(page 25)
C
(page 26)
D
Your setup (example)
c continued
21