Fuel Injector - Suzuki SY413 Service Manual

6E3-10 ENGINE AND EMISSION CONTROL SYSTEM (XUD9BSD ENGINE)

FUEL INJECTOR

REMOVAL AND INSTALLATION
Remove and install injector. Refer to the following items in "Over-
haul checking tuning manual".
"Removing the injectors"
"Reinstalling the injectors"
Special tool
(A): 09915-26510 / OUT0000001
Tightening torque
(a): 90 N·m (9.0 kg-m, 65.0 lb-ft)
DISASSEMBLY AND REASSEMBLY
Disassemble and reassemble injector. Refer to the following items
in "Overhaul checking tuning manual".
"Injector overhaul"
"Reassembling the injectors"
Special tool
(A): 09915-26510 / OUT0000001
(B): 09913-16520 / OUT0000073
Tightening torque
(b): 75 N·m (7.5 kg-m, 54.5 lb-ft)
INSPECTION AND ADJUSTMENT
Inspect and adjust injector. Refer to the following items in "Over-
haul checking tuning manual".
"Checking and setting injector timing"
"Checking injector seals"
"Checking injector pressure setting"
"Adjusting injector pressure"
Injector opening pressure
13000 " 50 kPa (130 " 5 kg/cm
2
)