Suzuki SY413 Service Manual page 3593

7A-14 MANUAL TRANSMISSION
1. Differential assembly
2. Transmission right case
3. VSS
1. Input shaft oil seal
2. Countershaft R bearing cup
RIGHT CASE
1) Remove differential gear assembly from right case.
2) Remove bolt and then pull out VSS.
CAUTION:
Be careful not to damage VSS when removing it.
3) Remove input shaft oil seal by using special tools (combination
of bearing remover and sliding shaft).
Special, Tool
(A): 09930-30102
(B): 09923-74510
4) Also pull out countershaft R bearing cup by using bearing re-
mover 09941-64511 with sliding shaft 09930-30102.
NOTE:
If input shaft R bearing has been left in right case, pull it out
by using bearing remover 09923-74510 with sliding shaft
09930-30102.