H3C S5500-SI Series Operation Manual page 23

Operation Manual – VLAN
H3C S5500-SI Series Ethernet Switches
Enter system view
Enable the security mode
of a voice VLAN
Configure the OUI
address of a voice VLAN
Enable the voice VLAN
feature globally
Enter Ethernet port view
Configure the working
mode as manual
Add the
ports in
manual
mode to the
voice VLAN
Configure
the voice
VLAN as
the default
VLAN of
the port
Enable the voice VLAN
feature on the port
To do...
system-view
voice vlan security
enable
voice vlan mac-address
oui mask oui-mask
[ description text ]
voice vlan vlan-id enable
interface interface-type
interface-number
undo voice vlan mode
auto
Refer to
Access port Access-Port-Based
VLAN.
Refer to
Trunk port
Trunk-Port-Based
Refer to
Hybrid port
Hybrid-Port-Based
Refer to section
Trunk port Configuring a
Trunk-Port-Based VLAN
Refer to
Hybrid port
Hybrid-Port-Based
voice vlan enable
Chapter 2 Voice VLAN Configuration
Use the command...
Configuring an
Configuring a
VLAN.
Configuring a
VLAN.
Configuring a
VLAN.
2-6
Remarks
—
Optional
Enabled by default
Optional
By default, each voice
VLAN has default OUI
addresses configured.
Refer to Table 2-1 for the
default OUI addresses of
different vendors.
Required
—
Required
Disabled by default
Use one of the three
approaches.
After you add an Access
port to the voice VLAN,
the voice VLAN becomes
the default VLAN of the
port automatically.
Optional
This operation is required
if the inbound voice traffic
is untagged. If the
inbound voice traffic is
tagged, do not configure
the voice VLAN as the
default VLAN of the port.
Required