Wolf CGB-2 Series Installation Instructions For Contractors page 4

Standard delivery
Accessories
4
1. Information on documentation/
standard delivery
1 x Gas condensing boiler ready to connect, in casing
1 x Suspension bracket for wall mounting
1 x Installation instructions for contractors
1 x Operating instructions for users
1 x Service instructions
1 x Commissioning checklist
1 x Label "G31/G30" (for conversion to LPG)
2 x Cold water/DHW connection elbow (only for combi boiler)
The following accessories are required for installing the gas condensing boiler:
- Air/flue gas accessories (see technical information)
- Control unit for room temperature-dependent or weather-compensated control
(AM/BM-2)
- Condensate drain outlet with hose retainer
- Maintenance shut-off valves for heating flow and return
- Gas ball valve with fire protection
- Heating side safety valve
- Safety assembly for DHW
- Locking caps for cylinder connection
(only when using appliances without DHW function)
Other accessories as per pricelist
3064810_201804