Care & Cleaning - Breville Barista Touch BES880 Instruction Book

ADJUSTING CONICAL BURRS
Some types of coffee may require a wider grind range to achieve an ideal extraction or brew.
A feature of your Barista Touch™ is the ability to extend this range with an adjustable upper burr.
We recommend making only one adjustment at a time.
1 2 3
AIR TIGHT
CONTAINER
Unlock hopper Hold hopper over container & turn Align hopper
dial to release beans into container into position
7 7 8 8 9 10
Remove wire Move adjustable Align the number Insert wire
handle from both top burr, 1 number, with the handle handle from both
sides of the burr coarser or finer opening sides of the burr
14 15
Lock hopper Check your
extraction
22
4 5 6
PUSH
Run grinder Remove hopper Remove upper
until empty burr
11 12 13
Push upper burr Lock upper burr Align hopper
firmly into
into position
position
Care & Cleaning
COLOUR TOUCH SCREEN DISPLAY
Please keep the touch screen dry and clean to ensure that the machine functions properly.
REPLACING THE WATER FILTER
1 2 2 3 4
Set current month Assemble water Ensure parts are Install filter in
tank
filter parts connected
The provided water filter helps prevent scale build-up in and on many of the inner functioning
components. Replacing the water filter after three months or 40L will reduce the need
to descale the machine.
The limitation of 40L is based on water hardness level 4. If you are in level 2 area,
you can increase this to 60L.
NOTE
To purchase water filters visit Breville webpage.
CLEANING CYCLE
There will be a message prompt when a cleaning cycle is required. This is a back-flushing cycle
and is separate from descaling. Follow the instruction on the screen.
DESCALING
After regular use, hard water can cause mineral build up in and on many of the inner functioning
components, reducing the brewing flow, brewing temperature, power of the machine, and taste of
the espresso. Even if you used the provided water filter, we recommend you to descale if there is
scale build-up in the water tank.
Go to 'Settings' and select 'Descale cycle'. Follow the instructions on the screen.
WARNING
Do not immerse power cord, power plug or appliance in water or any other liquid. The water tank
should never be removed or completely emptied during descaling.
5 6 !
Fill tank and wait Install water tank Replace filter after
for 5min to soak
90 days or after
filter 40L
23