Breville Barista Touch BES880 Instruction Book page 9

TEXTURING MILK
Different brands and types of milk and milk
alternatives will texture differently. You may
need to adjust the froth level accordingly. Start
with fresh cold milk. Fill milk jug to below the
spout position. Lift steam wand and insert into
milk jug. Lower steam wand, ensuring it is fully
down. The milk jug should rest on the milk
temperature sensor located on the drip tray
and milk should cover the ring around steam
wand tip. The toggle button under the 'Milk'
button will show you whether you placed the
milk jug correctly.
MAX
MIN
MILK MUST
COVER THIS
RING
NOTE
Use the indicator on the screen for the correct
milk jug position.
Under the 'Milk' button, temperature level
and froth level are displayed. They are preset
based on the drink you've chosen but you can
customise by touching those options.
To start, touch the 'Milk' button. The screen will
display the temperature of the milk as it heats.
Milk texturing will stop automatically when the
selected milk temperature is reached.
Lift steam wand to remove milk jug. Wipe the
wand & tip with a clean damp cloth. Lower
steam wand to the down position and the wand
will automatically purge.
16
NOTE
Prior to texturing milk, it is recommended to
momentarily purge the steam wand by first
touching the 'Milk' button. Touching the button
again will stop steam delivery.
MANUAL MILK TEXTURING
Auto milk texturing and auto shut-off are
disabled during manual milk texturing mode.
Lift the steam wand. Start frothing by touching
the button. When frothing is done, touch the
Milk button to stop.
Wipe the wand & tip with a clean damp cloth.
Lower steam wand to the down position and
the wand will automatically purge.
CAUTION: BURN HAZARD
Pressurised steam can still be released, even
after machine has been switched off.
Children must always be supervised.
NOTE
• When the machine creates steam, a pumping
noise can be heard. This is the normal
operation of the Italian pump.
• After 90 seconds of continuous steaming,
the machine will automatically disable the
steam function.
• Use exclusively the stainless steel milk jug
included in the pack to froth milk. The use of
container made of glass or plastic material to
froth milk may lead to dangerous conditions.
LONG BLACK
There are 3 preset Long Black settings –
Small (180ml), Medium (240ml), and Large
(360ml). Grind dose & tamp your portafilter &
insert into the group head. Position your cup
underneath the portafilter spouts & the hot
water spout. The hot water is delivered first,
and espresso will be extracted after that.
HOT WATER
The HOT WATER function can be used to
pre-heat cups or add hot water manually.
To start & stop hot water, touch 'Hot Water' on
the screen.
Hot water limit is approximately 90 seconds.
Depending on the size of your cup, you may
need to touch the 'Hot Water' button to stop
pouring.
NOTE
You cannot run hot water and extract espresso
at the same time.
ADDING NEW DRINK
Touch 'Add New' in the menu screen to create
a customised drink. You can adjust parameters
based on a standard style and save your own.
+
Add New
Alternatively, after manually adjusting
parameters touch the small icon to save
the current setting.
TIPS
Ensure the drip tray is firmly pushed in
place and emptied whenever the Empty Me!
indicator is displayed.
AUTO OFF MODE
The machine automatically switches to
AUTO OFF mode after 30 minutes.
SETTINGS
To enter settings menu, touch the icon
on the upper right of the screen.
Quick Start Guide
Machine will guide you on screen, step by step
to make an actual coffee.
Clean Cycle
The Cleaning Cycle cleans the shower screen
and back-flushes the group head.
Cleaning Steam Wand
This will show how to clean the steam wand
to remove any blockage for better steaming
performance.
Descale Cycle
Descaling prevents excess mineral and scale
build-up. A pop-up message will let you know
when it is time for descaling.
Brew Temperature
It allows you to adjust the recommended
extraction temperature.
Default Milk Temperature
It allows you to adjust default temperature level
on all milk base drinks.
Water Hardness
It is to test water to set how often you need to
descale the machine.
Screen Brightness
You can adjust brightness of your touch screen.
Sound Volume
You can adjust volume for alerts and reminders.
Demo Mode
It is for on-screen Barista Touch™
demonstration sequence.
Factory Reset
Use this function to reset all programmable
values back to the factory settings and delete all
custom drinks.
17