Care & Cleaning - Breville the Oracle Touch BES990DBL1BUS1 Instruction Book

Care & Cleaning
COLOR TOUCH SCREEN DISPLAY
Please keep the touch screen dry and clean to ensure that the machine functions properly.
REPLACING THE WATER FILTER
1 2 2
Set current month Assemble water
filter parts
The provided water filter helps prevent scale build-up in and on many of the inner functioning
components. Replacing the water filter after three months or 10.6 USgal / 40L will reduce the need
to descale the machine.
The limitation of 10.6 USgal / 40L is based on water hardness level 4. If you are in level 2 area,
you can increase this to 16 USgal / 60L.
NOTE
To purchase water filters visit Breville webpage.
CLEANING CYCLE
There will be a message prompt when a cleaning cycle is required. This is a back-flushing cycle
and is separate from descaling. Follow the instruction on the screen.
DESCALING
After regular use, hard water can cause mineral build up in and on many of the inner functioning
components, reducing the brewing flow, brewing temperature, power of the machine, and taste of
the espresso. Even if you used the provided water filter, we recommend you to descale if there is
scale build-up in the water tank.
Go to 'Settings' and select 'Descale cycle'. Follow the instructions on the screen.
WARNING
Do not immerse power cord, power plug or appliance in water or any other liquid. The water tank
should never be removed or completely emptied during descaling.
20
3 4
Ensure parts are Install filter in
tank
connected
5 6
Fill tank and wait Install water tank
for 5min to soak
filter
!
Replace filter after
90 days or after
40L (10. US GAL)