Breville Barista Touch BES880 Instruction Book page 16

PROBLEM POSSIBLE CAUSES
Machine is on but The safety thermal-cut out may
ceases to operate. have activated due to the pump or
grinder overheating.
No ground coffee No coffee beans in hopper.
coming from grinder.
Blocked grinder chamber or chute.
Water / moisture in grinder
chamber and chute.
Too much/too little Grind amount settings are incorrect
ground coffee is for particular grind size.
being delivered to
the filter basket.
Too much/too little Grind amount and/or grind size
espresso is being settings and/or shot volumes
delivered to the cup. require adjustment.
Grinder is making Blockage or foreign object
a loud noise. in grinder.
30
EASY SOLUTION
Press the POWER button to switch the
machine off and unplug from the power
outlet. Allow to cool for about
30–60 minutes.
If problem persists, call Breville
Support.
Filler hopper with fresh coffee beans.
Clean and clear grinder chamber
and chute. Refer to 'Advanced Cleaning
for the Conical Burr Grinder', page 24.
Clean and clear grinder chamber and
chute. Refer to 'Advanced Cleaning
for the Conical Burr Grinder', page 24.
Ensure burrs are thoroughly dry before
re-assembling. It is possible to use a
hair dryer to blow air into the grinder
chamber.
Use the grind duration button to
increase or decrease the grind
amount. Refer to 'Dosing', page 12 and
'Extraction Guide', page 18.
Adjust the grind amount and/or grind
size settings. Refer to 'Setting the Grind
Size', page 12, 'Dosing', page 14 and
'Extraction Guide', page 20.
Remove hopper, check for debris or
blockage. If necessary, clean and clear
grinder chamber and chute. Refer to
'Cleaning the Conical Burr Grinder',
page 24.
31