Unhooking And Inserting The Wire Shelves - BALAY 3HB509X Instruction Manual

Hide thumbs Also See for 3HB509X:
Table of Contents

Advertisement

To clean the oven's
enamelled bottom and
walls
Unhooking and
inserting the wire
shelves
Unhooking the wire shelves
Inserting the wire shelves
40
All manuals and user guides at all-guides.com
Suggestions and warnings
Never use abrasive detergents. These would scratch
and impair the highly porous lining.
Never use oven cleaning products on ceramics. If any
oven cleaning product accidentally falls on these
surfaces, immediately remove it with a cloth and
plenty of water.
Use a cleaning cloth and hot water with a little soap or
vinegar.
If very dirty, use a fine steel scourer or a special oven
cleaning product. These must only be used on a cold
oven. Do not use metal scourers or special oven
cleaning products on self-cleaning surfaces.
Wire shelves can be removed for cleaning. The oven
must be cold.
1. Lift the wire shelf from the front
2. and unhook it. (figure A)
3. Then pull the wire shelf completely.
4. and remove it. (figure B)
A
Clean the wire shelves with detergents and a sponge.
The use of a brush is recommended for stubborn
stains.
1. First insert the wire shelf in the rear groove by
pushing it back slightly (figure A)
2. Then insert it in the front groove. (figure B)
B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3hb619x

Table of Contents