The cooking time has
elapsed
Changing the end time
Time
Power cut
Changing the time
Hiding the time indicator
24
All manuals and user guides at all-guides.com
The oven goes on standby. The @ switch lights up.
The new setting appears on the display. The function
will be activated at 12:00 and deactivated at 12:45.
An acoustic signal sounds. The oven stops heating.
The display shows 00:00. Press the 0 switch to
switch off the confirmation beep.
The end time can only be changed when the oven is
on standby. Select the end time function with the 0
switch. Change the setting using the control knob.
The new setting has been saved correctly.
The oven must be switched off to change or set the
time.
Following a power cut, 00:00 and the 0 symbol
appear on the display. The time can be set.
1.
Press the 0 switch. The symbol for the function
selected 0Ì and the 12:00 option appear on the
display.
2.
Set the time using the control knob.
3.
Press the 0 switch to save the setting. The
updated time appears on the display.
This can be used to change the time, e.g. from
summer to winter time.
Press the 0 switch twice. The arrow appears beside
the function symbol 0Ì. Follow steps 2 and 3.
The time indicator may be hidden. It is therefore only
shown when the oven is on. For more information
please refer to the Changing the basic settings
chapter.