Unhooking and
inserting the wire
shelves
Unhooking the wire shelves
Inserting the wire shelves
20
All manuals and user guides at all-guides.com
Wire shelves can be removed for cleaning. The oven
must be cold.
1.
Lift the wire shelf from the front
2.
and unhook it. (figure A)
3.
Then pull the wire shelf completely.
4.
and remove it. (figure B)
A
Clean the wire shelves with detergents and a sponge.
The use of a brush is recommended for stubborn
stains.
1.
First insert the wire shelf in the rear groove by
pushing it back slightly (figure A)
2.
Then insert it in the front groove. (figure B)
A
Wire shelves can be adjusted on the left and right
hand side. They must always curve downwards.
B
B