Network - Aztech WL558USB User Manual

All manuals and user guides at all-guides.com
6. Fragment Threshold: User can adjust the Fragment threshold number by sliding
the bar or key in the value directly. The default value is 2346.
7. Channel: Only available for setting under Ad-hoc mode. Users can choose the
channel frequency to start their Ad-hoc network.
8. Authentication Type: There are 7 type of authentication modes supported by RaUI.
They are open, Shared, LEAP, WPA and WPA-PSK, WPA2 and WPA2-PSK.
9. Encryption Type: For open and shared authentication mode, the selection of
available encryption type are None and WEP. For WPA, WPA2, WPA-PSK and
WPA2-PSK authentication mode, both TKIP and AES encryption is available.
10. 802.1x Setting: This is introduced in the 802.1x topic.
11. Pre-shared Key: This is the key shared between the AP and STA. For WPA-PSK and
WPA2-PSK authentication mode, this field must be filled with a key between 8
and 32 characters in length.
12. WEP Key: Only valid when using WEP encryption algorithms. The key must be
identical to the AP's key. There are several formats to enter the keys as listed
below:
a. Hexadecimal - 40bits : 10 Hex characters.
b. Hexadecimal - 128bits : 26Hex characters.
c. ASCII - 40bits : 5 ASCII characters.
d. ASCII - 128bits : 13 ASCII characters.

Network

The system will display the information of local APs from the last scan result as part of
the Network section. The Listed information includes the SSID, BSSID, Signal, Channel,
Encryption algorithm, Authentication and Network type as shown below.
User Manual
Page 29 of 47