Icons And Buttons; Link Status - Aztech WL558USB User Manual

All manuals and user guides at all-guides.com
User Manual
f. Delete: Deletes an existing credential. And then selects the next credential.
If there is not another credential, the driver will select any non-security AP.
9. PIN: Start to add to Registrar using PIN configuration method. If STA Registrar,
remember that enter PIN Code read from your Enrollee before starting PIN.
10. PBC: Start to add to AP using PBC configuration method.
After the user clicks PIN or PBC, please do not rescan within two-minutes of the
connection. If you want to abort this setup within the interval, restart PIN/PBC or click
"Disconnect" to stop WPS action.
11. WPS associate IE: Sends the association request with WPS IE during the WPS setup.
It is optional for STA.
12. WPS probe IE: Sends the probe request with WPS IE during WPS setup. It is
optional for STA.
13. Progress Bar: Displays the rate of progress from Start to Connected.
14. Status Bar: Displays the current WPS Status.
15. Automatically select the AP: Starts to add to AP by using to select the AP
automatically in PIN method.

Icons and buttons

: Shows the Status Section.
: Hides the Status Section.

Link Status

The link status page displays detailed information about the current connection as shown
below.
Page 40 of 47