Hyundai GENESIS COUPE BK 2010 Manual page 2909

SMK :
- RKE CMD=LOCK/ Passive Access Lock=1& Lock confirmation failure
- TP AUTH=1/ PIC AUTH=1 / TP FBK=X2
Mechanical Key option Enable:
Mechanical LOCK & Lock confirmation failure
Action The state goes to DISARM state
Condition 6
State
Initial Condition ARMSTATE
Event
- IGN KEY ON
SMK :
- TP AUTH=1 / PIC AUTH=1 / TP FBK=X2
Mechanical Key option Enable:
- Mechanical UNLOCK
Action The state goes to DISARM state
- M-unlock
→Hazard relay for 0.5 sec. ON/OFF(twice)
Condition 7
State
Initial Condition REARM state
Event Execpt china spec:
- IGN KEY ON during 30sec or ALT "L"=on during 3 sec.
NON SMK :
- TX LOCK & Lock confirmation failure
- TX TRUNK
SMK :
- TP AUTH=1 / PIC AUTH=1 / TP FBK=X2
- RKE CMD=LOCK / PassiveAccess Lock=1 & Lock confirmation failure
- RKE TRUNK=1 / Trunk reopen=1
Mechanical Key option Enable:
- Mechanical UNLOCK
- Hazard relay for 0.5 sec. ON/OFF(twice)
- Mechanical LOCK & Lock confirmation failure
Action The state goes to DISARM state
Start Inhibit Relay OFF
Condition 8
State
Initial Condition PREARM state
- Key In Switch ON
- All entrance closed & Any Door is unlocked
- Any Door open & Tx Unlock
NON SMK:
Description
Description
Description