Oil Pressure Switch; Oil Pressure Warning Lamp - Hyundai GENESIS COUPE BK 2010 Manual

2. If the resistance value is not as shown in the table, replace the temperature sender.
Temperature
[°F(°C)]
Gauge angle (°)

Oil Pressure Switch

1. Check that there is continuity between the oil press switch terminal (A) and ground with the engine off.
2. Check that there is no continuity between the terminal and ground with the engine running.
3. If operation is not as specified, replace the switch.

Oil Pressure Warning Lamp

1. Disconnect the connector (A) from the warning switch and ground the terminal on the wire harness side connector.
2. Turn the ignition switch ON. Check that the warning lamp lights up. If the warning lamp doesn't light, test the bulb or
inspect the wire harness.
131(55)
-45
160(71) ~
230(110)
-70 ± 25
257(125)
+35