Hyundai GENESIS COUPE BK 2010 Manual page 2346

Monitor Scantool Data
1. Ignition "OFF", connect scantool.
2. Ignition "ON"& Engine "OFF", select "Current Data" mode.
3. Monitor the "Passenger airbag(2nd stage) resistance" parameter on the Scantool.
Specification :
0.9Ω< Resistance of 2nd stage Passenger airbag < 6.6Ω
Reference :
In a case of an open in the 2nd stage Passenger airbag circuit : FAIL
In a case of a short to battery in the 2nd stage Passenger airbag circuit: FAIL
In a caseof a short to ground in the 2nd stage Passenger airbag circuit : FAIL