Wheel Nut Tightening - Hyundai GENESIS COUPE BK 2010 Manual

1. Jack up the vehicle and support it with jack stands.
2. Measure the wheel runout with a dial indicator as illustrated.
3. Replace the wheel if the wheel runout exceeds the limit.
Runout mm

Wheel Nut Tightening

1. Tightening torque.
Tightening torque :
90 ~ 110N.m (9 ~ 11kgf.m, 65.1 ~ 79.5lb-ft)
When using an impact gun, final tightening torque should be checked using a torque wrench.
2. Tightening order.
Check the torque again after tightening the wheel nuts diagonally.
Limit
Aluminium
Radial
0.3
Axial
0.3