Setting Up The Server Rack - High End Systems CATALYST Series User Manual

CHAPTER 2
QuickStart
See "Product and Safety Information" for more information on warranties provided by
High End Systems for your product.

Setting up the Server Rack

1. Position the server rack upright on a platform constructed by latching the lid and the
roadcase base together.
2. The server rack contains a PowerMac
conditioner and a Digital Video Amplifier (VDA).
• The Catalyst DV model utilizes an Extron
• The Catalyst Pro version contains a DV1 Dual VDA
3. Set the LCD monitor on top of the server rack with the screen facing front and plug the
monitor power cord from the rack into the back of the monitor.
4. At the front of the server rack, pull the keyboard shelf out until it stops.
5. Plug the keyboard into the white USB connector port attached to the keyboard shelf.
6. Plug the mouse's USB plug into either of the two USB ports on the keyboard's back
edge.
TIP: For better performance, use the optical mouse on a non-reflective
surface instead of the keyboard tray.
CIB
Power
Cord
DV1
MacG5
REAR
4
®
G5, the Catalyst Interface Box (CIB) a power
Monitor Cable
Start Button
Catalyst Pro Media Server Rack Setup
®
VDA
USB
FRONT
Catalyst® V3 Media Server User Manual