High End Systems CATALYST Series User Manual page 212

Appendix D
Product and Safety Information
Installing Power Cord Caps
The Catalyst Media Server control rack may ship without an attached power cord cap.
Different locations (even within the same country) may require a different power cord cap
to connect the fixture to a power outlet.
Because of the variety of power cord caps used worldwide, High End Systems, Inc. cannot
make specific recommendations for the power cord cap.
Contact a local authority for the type of power cord cap needed. When installing the
power cord cap, note that the cores in the mains lead are colored in accordance with the
following code:
• green and yellow = ground/earth
• blue = neutral
• brown = live
Warning!
Class 1 equipment—this equipment must be grounded.
Installing a Power Cord Cap – UK Only
In the United Kingdom, the Colors of the cores in the mains lead of this equipment may
not correspond with the Colored markings identifying the terminals in the fixture's plug.
Therefore, install a line cord cap in accordance with the following code:
• The core Colored green and yellow must be connected to the plug terminal which is
marked with the letter "E," or by the earth symbol
yellow.
• The core Colored blue must be connected to the terminal which is marked with the
letter "N", or Colored black.
• The core Colored brown must be connected to the terminal which is marked with the
letter "L " or Colored red.
Warning!
Class 1 equipment—this equipment must be earthed.
Vatic Fitter Heads Information – Danmark
Advarsel: Beskyttelse mod elektrisk chock.
Vigtigt!
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket
196
, or Colored green, or green and
eller
Catalyst® V3 Media Server User Manual