Chapter 13: Audio; Audio Input; Configuring The Audio Feed - High End Systems CATALYST Series User Manual

Chapter 13:
Audio

Audio Input

Audio Inputs to the Media server can be displayed on any layer by choosing a Visual
Effects parameter DMX value of 123. This effect changes the Layer's output to a
waveform display of the audio input. The waveform can be manipulated with the Layer's
parameters in the same manner as other content played back from the hard drive.
The audio feed is input into the Catalyst Media Server via the PowerMac's audio in
connection.

Configuring the Audio Feed

1. On the back of the PowerMac computer, connect your audio feed
to the PowerMac's audio input port using a 3.5mm miniphone jack.
2. Quit the application.
3. Using the PowerMac
Finder, locate the
Audio MIDI Setup
application in the
Applications>Utilities
folder. Click to open the
file.
4. Assign the Default
Input to Built-In Audio.
5. Assign the Source to
Line In
6. Close the Audio MIDI
Setup window and
launch the Catalyst
application.
Catalyst® V3 Media Server User Manual
123