Activating The Audio Input; Waveform Type Selection - High End Systems CATALYST Series User Manual

CHAPTER 13
Audio

Activating the Audio Input

7. Use the Audio Input panel on the Catalyst Control window to activate Audio Input.
Click on the round On/Off button to activate the Video Input panel
When the Visual Effects parameter is
assigned a DMX value of 123, the Layer's
content is replaced with a waveform of the
audio input.
The Parameter 1 (FX1) selects different types
of audio waveforms. The Parameter 2 (FX2)
parameter does not function with this Visual
Effect.

Waveform Type Selection

The following chart lists the waveform types available by
adjusting the Parameter 1 (FX1) parameter:
Waveform Type
Mono Sound Waveform with Solid Outline
Mono Sound Envelope with Solid Outline
Mono Sound Single Waveform with Solid Outline
Mono Sound Single Waveform with Dashed Outline
Stereo Sound Dual Envelope with Solid Outline
Spectral Analysis by Frequency
Phase Vector Scope drawn as Solid Lines
Phase Vector Scope drawn as Solid Lines
Phase Vector Scope drawn as Dots
124
A Layer displaying an
audio input waveform.
DMX
Value
0
1
2
3
4
5
6
7
8
Catalyst® V3 Media Server User Manual