Adding Trails To Layer 2 - High End Systems CATALYST Series User Manual

CHAPTER 3
Tutorials

Adding Trails to Layer 2

6. On your lighting console, select Layer 2. Set
the Intensity parameter to a DMX value of
255(100%).
7. Select Library 0 (HES lithos) and File 28
(comet). Using the preloaded Catalyst content,
you should now see a greyscale pinwheel
image on Output 1.
8. Adjust the DMX value of the Z Rotation
parameter so the Layer 1 image starts
spinning slowly— 20 rotations per minute, for
example.
9. Assign the DMX value of the Color Effects
parameter to 3 (transparent blacks). You will
now see the Trails effect from Layer 1 is
applied to Layer 2.
10. When finished, clear or remove any
information from the above lesson in your
lighting console's programmer or editor.
18
Catalyst® V3 Media Server User Manual