Setup The Second Cue And Playback - High End Systems CATALYST Series User Manual

CHAPTER 3
Tutorials

Setup the Second Cue and Playback

9. On your lighting console, select Layer 2. Change the Intensity parameter to a DMX
value of 255 (100%).
10. Use your lighting console's cue timing options to assign a 3 second time value to the
Intensity parameter.
11. Record these DMX settings and timing information as Cue 2 on your lighting console.
12. Clear your lighting console's programmer or
editor. The Catalyst Output 1 screen should
change to all black.
13. Using your lighting console, playback the Cue
1 created above. The first movie plays on the
Output 1 window of the Catalyst system.
14. Using your lighting console, playback the Cue
2 created above. Output 1 shows Layer 1
crossfading to Layer 2 over a 3-second interval.
15. When finished, follow your lighting console's
procedure to turn off or release any cues that
are playing back.
14
Catalyst® V3 Media Server User Manual