Installing And Configuring The Software For Windows; Before You Begin - Epson Stylus C84WN Setup And Installation Manual

Installing and Configuring the
Software for Windows
This chapter explains how to install the software, configure the print server, and
set up a network port for your Windows computer. It also explains how to set up
additional computers to use the printer on a wireless network.
Before you can configure the print server, you need to make sure that your wireless
network card or adapter is installed and ready. If you have an existing network,
you also need to verify that your access point is operating correctly and linked to
your computer. If you need instructions, see the documentation or help files that
came with your equipment.
Then follow the instructions in these sections:
Checking your wireless settings to make sure you're ready
Installing the Stylus C84WN software
Configuring the print server
Setting up a network port
Setting up additional computers

Before You Begin

Before you begin to install and configure the software, do the following:
Follow the instructions beginning on page 11 to set up the printer, install ink
cartridges, load paper, and connect the print server.
If your computer has a wireless network card or adapter, make sure the
wireless mode is set to
through an access point), or
an access point). For instructions, see the documentation or online help for
your wireless card or adapter.
Note:
Do not select a pseudo ad hoc or proprietary ad hoc mode.
(if you are connecting to the printer
Infrastructure
802.11b Ad Hoc

Installing and Configuring the Software for Windows

(if you are connecting without
19