Epson Stylus C84WN Setup And Installation Manual page 29

Hide thumbs Also See for Stylus C84WN:

Table of Contents

5. Click

. You see a window

like this:

6. In the

Printer Name or IP

box, enter the print

Address

server's name (if you're

connecting using DHCP) or

IP address (if you're

connecting in Static Mode).

Then click

7. Follow the instructions on the

screen to complete the wizard.

8. Click

to close the Printer Ports window, then click

Properties window.

9. To test the connection, select the

If the test page prints, click

If it fails to print, try the following:

Make sure that the printer and print server are connected, plugged in, and

turned on.

Check the printer to see if a red light is on or flashing, indicating that

paper or ink is out, or paper is jammed. See Printer Basics for details.

Check WP-Admin to make sure you have a signal (see page 24).

Make sure you've entered the correct name or IP address in step 6.

Make sure you clicked

Now you're ready to start printing. For instructions, see Printer Basics.

General

to close the Properties window.

in step 8.

Apply

tab and click

Print Test Page

Setting Up a Network Port

on the

Table of Contents