Installing The C84Wn Software - Epson Stylus C84WN Setup And Installation Manual

If your adapter does not include an
mode to
Ad Hoc
uses to communicate without an access point. Do not select a pseudo ad hoc or
proprietary ad hoc mode. See the documentation for your wireless adapter for
details.
If you're using infrastructure mode, make sure there is a link with good signal
strength (greater than 50 percent) between the Macintosh and base station or
access point. See your wireless adapter's documentation for details.
If you're configuring the print server from a Macintosh with a non-AirPort
wireless adapter, make sure WEP (Wired Equivalent Privacy) is disabled
before you begin. See the documentation for your wireless adapter for
instructions.

Installing the C84WN Software

Your printer software CD-ROM includes the following software:
EPSON Stylus C84WN printer driver
You must install the printer driver on every Macintosh that uses the EPSON
Stylus C84WN printer. This software controls print settings, monitors printer
status, and provides several utilities for printer maintenance. For instructions
on using your printer driver, see the Printer Basics book.
EpsonNet Wireless Print Server Utilities
This includes WP-Admin, which lets you configure the print server. You only
need to install WP-Admin on one Macintosh on your network.
EPSON Software Film Factory
This photo management program lets you organize, beautify, and print your
photos in a flash.
Printer Movies and User Guide (EPIC)
This program includes Print Show animated tutorials and a comprehensive
User Guide for your printer.
The print server also comes with a built-in web-based configuration utility.
This lets you change configuration settings from any computer on the wireless
network that supports a standard web browser. You must configure the print
server using WP-Admin before you can use the utility.
802.11b Ad Hoc
,
Computer-to-Computer
option, set the wireless
, or whatever mode your adapter
Installing the C84WN Software
37