SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers.
Contents Introduction EpsonNet External Print Server Installing Printer Software on Windows 98 and Me Using Status Monitor Turning Status Monitor Off and On Again Getting Help with Status Monitor Network Software Utilities Where To Get More Information EpsonNet Install Wizard...
Server that you connect to the printer’s parallel port. With the print server, EpsonNet configuration software, and additional utilities, you can monitor printer status, manage network printers, and print across the Internet. ® You can print to the EPSON Stylus C84N through the network from Microsoft ® ® ®...
1. Turn on the computer and make sure it is properly connected to the network. Make sure the printer and print server are on. 2. Put the EPSON Printer Software CD in your CD-ROM or DVD drive. You see the EPSON Installation Program window.
Page 7
4. Click when you see the following dialog box. 5. Restart the computer when prompted. 6. After the computer restarts, open the EPSON Program Installation window again. To do this, double-click icon, then double-click the 7. Double-click Install EpsonNet Install Wizard 8.
Page 8
Install Wizard searches the network, finds your printer, and displays it in a dialog box. This can take 20 to 30 seconds. Select the check box next to your printer 10. Select the check box next to your printer and click Install Wizard automatically installs the printer driver and configures the printer port.
Using Status Monitor EPSON Status Monitor enables you to monitor one or more network printers from any computer running Windows 98, NT 4.0, Me, 2000, or XP. Status Monitor shows ink levels for the printer and notifies you if the printer has any problems.
Turning Status Monitor Off and On Again To turn off Status Monitor, follow the steps below. 1. Right-click the Preferences You see the following dialog box. Make sure these check boxes are clear 2. Clear all check boxes in the Select Notification section, then click Monitor is now turned off.
Getting Help with Status Monitor To get more information about Status Monitor, follow the steps below: 1. Right-click the Status Monitor icon in the taskbar, then click Printer . You see the following dialog box. Settings Click this button 2. Click the button to open online help.
■ EpsonNet Direct Print Utility If you set up a Windows 98 or Me computer to use the printer, you used this utility as part of the setup. Direct Print enables TCP/IP (LPR) printing in Windows 98 and Me. To install Direct Print, see page 6. For more information about Direct Print, see the online Administrator’s Manual.
CD-ROM. ■ EPSON technical support EPSON offers a variety of technical support options. See the Printer Basics book for more information. . If you don’t have Adobe Reader, install it when files on the printer software CD-ROM.
Also, make sure both the printer and print server are on. 2. Make sure your Windows computer is connected to the network, then turn it on. 3. Insert the EPSON Printer Software CD in your CD-ROM or DVD drive. You see the EPSON Installation Program window.
Also, make sure both the printer and print server are on. 2. Make sure the computer is connected to the network, then turn it on. 3. Insert the EPSON Printer Software CD in your CD-ROM or DVD drive. You see the EPSON Installation Program window.
EpsonNet WebManager lets you monitor and control your network printers. It supports Windows, Macintosh, and UNIX platforms, and allows you to manage EPSON printers that support the printer MIB (Management Information Base) standard, RFC 1759. Although EpsonNet WebManager supports multiple network platforms, you can only install it in a Windows NT 4.x, 2000, or XP environment.
The following are the main functions of EpsonNet WebManager: ■ Device list Searches for printers on the network and displays a list with current status. ■ Device details Lets you change printer settings. ■ Network settings Lets you change network interface settings. ■ Group management Helps you manage network printers more effectively.
(a client). This lets you manage your network printers from Windows, Macintosh, or UNIX platforms: Client computers Windows Macintosh UNIX Printer with an EpsonNet external print server Printer with an EpsonNet internal print server Printer with a built-in network interface...
Also, make sure both the printer and print server are on. 2. Make sure the computer is connected to the network, then turn it on. 3. Insert the EPSON Printer Software CD in your CD-ROM or DVD drive. You see the EPSON Installation Program window.
Page 20
You see the main page: Click to view the online manual To view the EpsonNet WebManager online manual, click the main menu, then click Online Manual You can also click the functions on that page. help icon on any page in the manual to get help with the button in the Help CPD-16966...
Need help?
Do you have a question about the Stylus C84N and is the answer not in the manual?
Questions and answers