1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. Stylus C84WN
  6. Start here manual

Epson Stylus C84WN Start Here Manual

Epson stylus c84wn: quick start
Hide thumbs Also See for Stylus C84WN:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual

Start Here

EPSON Stylus
Follow these instructions if you're an advanced user and your network has a
wireless access point or AirPort
that have wireless access points. For more detailed instructions, see your
Setup and Installation book.
1
Unpack and

Set Up the Printer

1
Take everything out of the box.
Print server
Print server
power supply
Power cord
2
Remove all the tape and packing material inside and around the printer.
The tape may be in different places on your printer, so check carefully.
3
Slide the paper support into
the slot on the back
of the printer.
4
Connect the printer's power cord
to the printer, then plug it into a
standard electrical outlet.
5
Press the printer's
until the green power light comes on.
6
Lower the output tray, pull out the
extension, and open the cover.
7
Shake the package of ink cartridges
4 or 5 times. Then remove the
cartridges from the package.
(Don't shake them after
removing the packaging.)
®
C84WN
®
Base Station. This includes wired networks
Print server base
Parallel cable
Ink
cartridges
Don't touch
this cable
power button
Setup and
Installation
Printer software
CD-ROM
Carefully remove
this piece
Printer Basics
Paper support
Printer
Power button
continue

Advertisement

Table of Contents
loading

Related Manuals for Epson Stylus C84WN

Summary of Contents for Epson Stylus C84WN

  • Page 1: Start Here

    Power cord Remove all the tape and packing material inside and around the printer. The tape may be in different places on your printer, so check carefully. Slide the paper support into the slot on the back of the printer.

  • Page 2: Install The Software

    Optionally, double-click Install EPSON Software Film Factory and follow the instructions on the screen to install this photo management program. Double-click Register your EPSON Stylus C84WN and follow the on-screen instructions to register your printer. Close your browser when you’re done.
  • Page 3 ® OS X: Double-click the EPSON CD-ROM icon to open it, then double-click the EPSON OS X Installer icon. Mac OS 8.6 to 9.x: Double-click the EPSON OS 8 & 9 Installer icon. Double-click Install EPSON Stylus C84WN Printer Driver.

  • Page 4: Connect The Print Server

    Slide the print server into the base and press firmly. It should click into place. Turn off the printer. Then connect the parallel cable to the printer and print server. Connect the power supply to the print server and plug in the AC adapter.

  • Page 5: Configure The Print Server

    Windows: Click Finish on the last screen. Then continue with the instructions in the next section to set up a network port. Mac OS X: Add the printer to Print Center or Printer Setup Utility. (For details, see Setup and Installation.) Congratulations! You’re ready for wireless printing.
  • Page 6 Set Up a Network Port You need to add the printer’s network port to each Windows computer that will access it. If necessary, print a status page and note the server name or IP address of your print server before you begin. For instructions on setting...
  • Page 7 Make sure Network is selected, then click Browse. Click to expand the network path, then click the + next to Epson _ Ipr and select your printer. Click OK, then click OK again. Click Apply on the Details tab. To test the connection, click the General tab and click Print Test Page.

  • Page 8: Where To Get Help

    (800) 922-8911. Your EPSON SoundAdvice Use this code to quickly select the EPSON Stylus C84WN in SoundAdvice. EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. EPSON Software is a trademark, and SoundAdvice is a service mark of Epson America, Inc.

Table of Contents