European Union (Eu); Fcc - Siemens Ruggedcom RS416P Installation Manual

Chapter 6
Certification
A copy of the CSA Certificate of Compliance is available via Siemens Industry Online Support at
support.industry.siemens.com/cs/ww/en/view/109476557.
Section 6.1.2

European Union (EU)

This device is declared by Siemens Canada Ltd to comply with essential requirements and other relevant provisions
of the following EU directives:
• EN 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements
• EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity for Industrial Environments
• EN 55022
Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement
• EN 50581
Technical Documentation for the Assessment of Electrical and Electronic Products with Respect to the Restriction
of Hazardous Substances
• EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
The device is marked with a CE symbol and can be used throughout the European community.
A copy of the EU Declaration of Conformity is available via Siemens Industry Online Support at
support.industry.siemens.com/cs/ww/en/view/109482109.
Section 6.1.3

FCC

This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case users will be required to
correct the interference at their own expense.
40
C US
RUGGEDCOM RS416P
Installation Guide
https://
https://
European Union (EU)